BS-100A Automatic fraction collector
BS-100A Automatic fraction collector Design with ABS plastic shell, BSZ series collectors use new
single-chip technology and frequency conversion speed regulation technology, which can automatically
and quickly reset, stabilize and mute. The collector has English menu operation settings, timing functions,
the other with automatic reset after the research, the operation can be suspended at any time (without repeated steps),
with POST and automatic Seek orbit, fault tips (liquid leak alarm). The current tube, time, remaining tube is shown
on the LCD screen . After the research, the instrument will reset automatically, Low power (15w) make the device safer.
.It also has a solenoid valve control to prevent the process of switching tube liquid leaks .Our collector can connect
to peristaltic pump which produced from our factory.
Features:
• Round turntable design, accurate to the tube.
• Boot automatically detect function.
• with solenoid valve control, to prevent liquid leakage during switching exchange tube.
•The use of SCM control, take the tube accurate.
• Low noise, stable operation, easy to operate.
• new motor drive design, rapid reset.
• Connect to peristaltic pump which produced from our factory.
• Wide voltage design for complex power supply environments.
Application areas:
• Wastewater treatment
• Pumping liquid in Environmental experiments
• Food experiment
• Bioengineering experiment
• Separation chromatography experiment
model | BS-100A Automatic fraction collector | |
Tube quantity | 100 | |
Maximum capacity | 12ML | |
Time set | 1s-200hours | |
Function set | Time set | |
display | LCD | |
Data save after power off | 10 years | |
Outer space interface | 5V(Can be used with my factory collector) | |
Working environment temperature | Temperature 0-40℃ ,Humidity <85% | |
Power supply voltage | 110/220AV 50HZ | |
Anti-vibration | 10-500HZ | |
Dimensions | 265*350*360mm | |
Weight | 8.5KG |